Can't get transceiver up after shutdown command

Created: Jun 19, 2019 04:51:28Latest reply: Jun 25, 2019 01:43:58 127 4 0 0
  Rewarded Hi-coins: 0 (problem resolved)

Info:


VRP (R) software, Version 5.170 (S6720 V200R010C00SPC600)

Copyright (C) 2000-2016 HUAWEI TECH CO., LTD

HUAWEI S6720S-26Q-EI-24S-DC

no patch


[HUAWEI-40GE0/0/2]dis transceiver interface 40GE 0/0/2 v          


40GE0/0/2 transceiver information:

-------------------------------------------------------------

Common information:

  Transceiver Type               :40GBASE_LR4_QSFP+

  Connector Type                 :LC

  Wavelength(nm)                 :1310

  Transfer Distance(m)           :10000(9um),300(OM3)

  Digital Diagnostic Monitoring  :YES

  Vendor Name                    :FS              

  Vendor Part Number             :QSFP-LR4-40G    

  Ordering Name                  :

-------------------------------------------------------------

Manufacture information:

  Manu. Serial Number            :S1807440710     

  Manufacturing Date             :2018-08-01

  Vendor Name                    :FS         



Problem:

After a shutdown/no shutdown command on interface, transceiver doesn't come back. Tx signal gets stuck at -40 and current values read as 0.

Only solution is to disconect transceiver physycly from device and connect back.

  • x
  • convention:

Featured Answers
Admin Created Jun 19, 2019 09:23:25 Helpful(0) Helpful(0)

  • x
  • convention:

All Answers
Popeye_Wang Admin Created Jun 19, 2019 09:23:25 Helpful(0) Helpful(0)

  • x
  • convention:

AGregory MVE Created Jun 21, 2019 20:52:21 Helpful(0) Helpful(0)

@Popeye_Wang I'm checking with the qsfp vendor. Strangely , the sfp works fine, just doesn't come back after a shutdown.
  • x
  • convention:

ogh Created Jun 21, 2019 22:08:26 Helpful(0) Helpful(0)

Are you in site?? How far is the other end??
  • x
  • convention:

AGregory MVE Created Jun 25, 2019 01:43:58 Helpful(0) Helpful(0)

@ogh Testing in laboratory, same problema.
I'm checking with the qsfp vendor, it maybe some firmware problem.
  • x
  • convention:

Reply

Reply
You need to log in to reply to the post Login | Register

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!

Login and enjoy all the member benefits

Login
Fast reply Scroll to top