can't enable RW sharing on EG8145V5

Hello,

please refer to the following details:

Click Advanced Configuration > Application tab, and choose Media Sharing

in the navigation tree on the left. In the right pane, configure the media

sharing settings, Then click Apply. as shown in the following Figure：

If you cannot access files on the USB storage device through the PC, perform the following operations: 

1. Confirm whether the USB sharing and printing function is turned on. This option is under the application menu. If not, then your device may be a customized machine of the operator, and the media function cannot be used. Please contact the operator for technical support.

2. Check whether the USB port is securely connected. 

3. The USB storage device is damaged. (Do not remove or insert the USB device during use. Otherwise, files in the device may be damaged.) 

4. Your device (application terminal) does not support the DLAN function

5. Check whether the specified path is enabled. The possible cause is that no file exists in the specified path. 

Thanks

Dear friend!
1. Do you mean to read and write the hard disk shared by the USB port of the EG8145V5 through MacOS or Ubuntu20.04 or read but not write?
2. Do you use a PC running Windows to perform the test?
3. Check whether files on the hard disk are protected. Therefore, writes are restricted.

Please provide your details again, which will help us solve your problem accurately and effectively.

Thanks！

@wissel i'm not talking about DLNA sharing, I'm talking about SMB sharing

@liqiang185 I am trying to enable read/write access. I have read-only access set up just fine, either with or without authentication. If I enable authentication and set that user to RW I am forced to authenticate to the share but I still can't write to any path. The files are not write protected. My primary machine is macOS and I have an Ubuntu machine but I tested with Windows 10 and it still won't allow me to create any files.

This is the config: