Can OLT and ONT of Huawei PON simulate dial-up test?

Hello, friend!

You can perform an ONT analog dialup test through the OLT.

Only the OLTs and ONTs that support the protocols support ONT call emulation.

Caller emulation and callee emulation require a test phone set. In default test mode, the quality of calls over media channels is determined through DTMF numbers. Therefore, it is recommended to use a test phone set that supports DTMF dialing.、

The procedure is as follows:

1. run the test command to enter the test mode.

2. run the ont emulational call command to start an ONT caller emulation test.

3. The caller emulation port automatically dials the number of the callee's test phone set.

4. The callee picks up the phone after hearing ringing.

5. The callee hears alert tones and presses the pound key (#) for confirmation.

6. The OLT outputs the test result. The caller emulation test ends.

7. The following table lists the possible caller emulation test results.

An ONT call emulation test is a special operation. After the test commands are executed, test results are returned only when the emulation test duration has elapsed. During the test, users can run the display ont emulational call status command to query the test status.

Generally, a call emulation test automatically terminates after the preset emulation test duration has elapsed. If you want to manually terminate a call emulation test before the preset duration elapses, run the undo ont emulational call command.

Thanks!