can not bind the ip address to the mac address.

Created: May 22, 2019 20:19:46Latest reply: May 22, 2019 20:22:59 54 4 0 0
  Rewarded Hi-coins: 0 (problem resolved)

to improve the device security, we enabled the dhcp snooping and ip source check, and we want to bind a few ip address in static way, but when we input the command, it’s not accepted by the device. the device report error: the ip address’s status is error. but for other ip address, there is no problem when binding the mac address with the ip address.

any suggestions?

  • x
  • convention:

Featured Answers
chenhui  Engager   Created May 22, 2019 20:20:22 Helpful(0) Helpful(0)

@sim_157 hi!

Are the DHCP services enabled? 

If you have enabled the DHCP server, please check the DHCP server if the IP addresses which reports the error when binding are in use. 

If the IP addresses are in use when binding them to the MAC address, the switch will report the error. You can release the leased IP and then add the static binding.
  • x
  • convention:

All Answers
chenhui  Engager   Created May 22, 2019 20:20:22 Helpful(0) Helpful(0)

@sim_157 hi!

Are the DHCP services enabled? 

If you have enabled the DHCP server, please check the DHCP server if the IP addresses which reports the error when binding are in use. 

If the IP addresses are in use when binding them to the MAC address, the switch will report the error. You can release the leased IP and then add the static binding.
  • x
  • convention:

sim_157  Visitor   Created May 22, 2019 20:21:55 Helpful(0) Helpful(0)

Posted by chenhui at 2019-05-22 20:20 @sim_157 hi,are the dhcp services are enabled? if you enabled the dhcp server, please check the dhcp ...
you mean if the ip address is leased, I can not bind this ip address to a mac address?
  • x
  • convention:

chenhui  Engager   Created May 22, 2019 20:22:39 Helpful(0) Helpful(0)

Posted by sim_157 at 2019-05-22 20:21 you mean if the ip address is leased, I can not bind this ip address to a mac address?
yes, you should release the ip address first, then add the static binding.
  • x
  • convention:

sim_157  Visitor   Created May 22, 2019 20:22:59 Helpful(0) Helpful(0)

Posted by chenhui at 2019-05-22 20:22 yes, you should release the ip address first, then add the static binding.
OK, I'll try that.
  • x
  • convention:

Reply

Reply
You need to log in to reply to the post Login | Register

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!

Login and enjoy all the member benefits

Login
Fast reply Scroll to top