Can METRO's PM2D and ET10 coexist?

wissal · Created May 11, 2020 22:38:06

Hello,

Of course, they can coexist. PM2D is a 32-channel E1 / T1 service processing board. ET1O is an 8-way 10M / 100M Ethernet electrical interface board.

The former is 2M, and the latter is an Ethernet board.

Thanks

Malik3000 · Created May 12, 2020 00:19:32

Hi
if u mean in Metro 1000 , I think u cant install them at the same time because they are both big boards should be installed in slot IU4 , other slots are all small in size.

regards

wissal · Created May 11, 2020 22:38:06

Hello,

Of course, they can coexist. PM2D is a 32-channel E1 / T1 service processing board. ET1O is an 8-way 10M / 100M Ethernet electrical interface board.

The former is 2M, and the latter is an Ethernet board.

Thanks

IQ · Created May 11, 2020 22:47:47

Yes ! , they can coexist, And A very smart question

You will find all the details you need here:

((3.3.2 E1/T1 Compliant Electrical Interface Board SM1S/SM1D/PM2S/PM2D/PM2T))

https://support.huawei.com/view/contentview!getFileStream.action?mid=SUPE_DOC&viewNid=EDOC0100470923&nid=EDOC0100470923&partNo=j006&type=htm#tc_sdh_1000_pd_0027

Malik3000 · Created May 12, 2020 00:19:32

Hi
if u mean in Metro 1000 , I think u cant install them at the same time because they are both big boards should be installed in slot IU4 , other slots are all small in size.

regards

Can METRO's PM2D and ET10 coexist?

Best answer

Recommended answer

Third Party’s Trade Secret

My Followers

Enterprise

Consumer

Corporate

Carriers

Can METRO's PM2D and ET10 coexist?

Best answer

Recommended answer

Third Party’s Trade Secret

My Followers