Can I Directly Delete Inner VLAN IDs from QinQ Configuration?

Latest reply: Apr 10, 2016 13:43:23 1061 1 0 0
Can I Directly Delete Inner VLAN IDs from QinQ Configuration?
  • x
  • convention:

Created Apr 10, 2016 13:43:23 Helpful(0) Helpful(0)

If the switch is running V100R005 or an earlier version, one or more inner VLAN IDs in QinQ cannot be directly deleted. You must delete the current selective QinQ configuration, and then reconfigure the inner VLAN IDs that do not need to be deleted.

For example, the port vlan-stacking vlan 10 to 20 stack-vlan 100 command is configured on the switch. To delete inner VLAN 15, perform the following operations:
Run the undo port vlan-stacking vlan 10 to 20 stack-vlan 100 command to delete the current selective QinQ configuration.
Run the port vlan-stacking vlan 10 to 14 stack-vlan 100 and port vlan-stacking vlan 16 to 20 stack-vlan 100 commands to reconfigure the inner VLAN IDs that do not need to be deleted.
If the switch is running a version later than V100R005, one or more inner VLAN IDs in QinQ can be directly deleted.

  • x
  • convention:

Reply

Reply
You need to log in to reply to the post Login | Register

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!

Login and enjoy all the member benefits

Login
Fast reply Scroll to top