Got it

Can eNSP support the MPLS TE FRR configuration?

Created: Jan 3, 2018 04:37:31Latest reply: Nov 2, 2018 09:37:54 5423 11 1 0 0
  Rewarded HiCoins: 0 (problem resolved)

Hi there!


I have a question: can eNSP support the MPLS TE FRR configuration?


I tried builduing a lab folowing a Hedex example. All is OK - tunnels are up, LSP's are reachable, but FRR is not operational.


 


<R2>dis cur int Tunnel


#


interface Tunnel0/0/1

ip address unnumbered interface LoopBack0

tunnel-protocol mpls te

destination 3.3.3.3

mpls te tunnel-id 300

mpls te record-route

mpls te path explicit-path by-path

mpls te protected-interface GigabitEthernet0/0/0

mpls te commit

#

return

 

 


<R2>display mpls te tunnel name Tunnel0/0/0 verbose

   No                      :  1

   Tunnel-Name             :  Tunnel0/0/0

   Tunnel Interface Name   :  -

   TunnelIndex             :  0           LSP Index         :  2048

   Session ID              :  100         LSP ID            :  1

   Lsr Role                :  Transit

   Ingress LSR ID          :  1.1.1.1

   Egress LSR ID           :  4.4.4.4

   In-Interface            :  Eth0/0/0

   Out-Interface           :  GE0/0/0

   Sign-Protocol           :  RSVP TE     Resv Style        :  SE

   IncludeAnyAff           :  0x0         ExcludeAnyAff     :  0x0

   IncludeAllAff           :  0x0

   ER-Hop Table Index      :  1           AR-Hop Table Index:  0

   C-Hop Table Index       :  -

   PrevTunnelIndexInSession:  -           NextTunnelIndexInSession:  -

   PSB Handle              :  3586

   Created Time            :  2018-01-02 08:53-08:00

   --------------------------------

             DS-TE Information            

   --------------------------------

   Bandwidth Reserved Flag :  Unreserved

   CT0 Bandwidth(Kbit/sec) :  0           CT1 Bandwidth(Kbit/sec):  0

   CT2 Bandwidth(Kbit/sec) :  0           CT3 Bandwidth(Kbit/sec):  0

   CT4 Bandwidth(Kbit/sec) :  0           CT5 Bandwidth(Kbit/sec):  0

   CT6 Bandwidth(Kbit/sec) :  0           CT7 Bandwidth(Kbit/sec):  0

   Setup-Priority          :  7           Hold-Priority     :  7

   --------------------------------

               FRR Information              

   --------------------------------

   Primary LSP Info

   TE Attribute Flag       :  0x63        Protected Flag    :  0x0

   Bypass In Use           :  Not Exists

   Bypass Tunnel Id        :  -

   BypassTunnel            :  -

   Bypass Lsp ID           :  -           FrrNextHop        :  -

   ReferAutoBypassHandle   :  -

   FrrPrevTunnelTableIndex :  -           FrrNextTunnelTableIndex:  -

   Bypass Attribute(Not configured)

   Setup Priority          :  -           Hold Priority     :  -

   HopLimit                :  -           Bandwidth         :  -

   IncludeAnyGroup         :  -           ExcludeAnyGroup   :  -

   IncludeAllGroup         :  -

   Bypass Unbound Bandwidth Info(Kbit/sec)

   CT0 Unbound Bandwidth   :  -           CT1 Unbound Bandwidth:  -

   CT2 Unbound Bandwidth   :  -           CT3 Unbound Bandwidth:  -

   CT4 Unbound Bandwidth   :  -           CT5 Unbound Bandwidth:  -

   CT6 Unbound Bandwidth   :  -           CT7 Unbound Bandwidth:  -

   --------------------------------

              BFD Information

Attachment: You need to log in to download or view. No account? Register
  • x
  • convention:

All Answers
user_2808897
user_2808897 Created Mar 2, 2018 23:04:55

Try running it on NE 5000E router available in the older eNSP version B390. I faced a similar problem on the AR routers and was able to simulate on NE5000E.
View more
  • x
  • convention:

SupperRobin
SupperRobin Created Nov 2, 2018 09:37:54

  • x
  • convention:

12
Back to list

Comment

You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.
Information Protection Guide
Thanks for using Huawei Enterprise Support Community! We will help you learn how we collect, use, store and share your personal information and the rights you have in accordance with Privacy Policy and User Agreement.