Hi i checked the configuration folowing your advise, but still looks something wrong
please find attached config files for ENSP, may be you can check it on your PC
still can not see FRR tunnel information on 2B router please check below
<Huawei>display mpls te tunnel name Tunnel0/0/1 verbose
No : 1
Tunnel-Name : Tunnel0/0/1
Tunnel Interface Name : Tunnel0/0/1
TunnelIndex : 1 LSP Index : 2049
Session ID : 300 LSP ID : 1
Lsr Role : Ingress Lsp Type : Primary
Ingress LSR ID : 2.2.2.2
Egress LSR ID : 3.3.3.3
In-Interface : -
Out-Interface : GE0/0/0
Sign-Protocol : RSVP TE Resv Style : SE
IncludeAnyAff : 0x0 ExcludeAnyAff : 0x0
IncludeAllAff : 0x0
LspConstraint : -
ER-Hop Table Index : 0 AR-Hop Table Index: 1
C-Hop Table Index : -
PrevTunnelIndexInSession: - NextTunnelIndexInSession: -
PSB Handle : 1029
Created Time : 2018-01-03 14:18-08:00
--------------------------------
DS-TE Information
--------------------------------
Bandwidth Reserved Flag : Unreserved
CT0 Bandwidth(Kbit/sec) : 0 CT1 Bandwidth(Kbit/sec): 0
CT2 Bandwidth(Kbit/sec) : 0 CT3 Bandwidth(Kbit/sec): 0
CT4 Bandwidth(Kbit/sec) : 0 CT5 Bandwidth(Kbit/sec): 0
CT6 Bandwidth(Kbit/sec) : 0 CT7 Bandwidth(Kbit/sec): 0
Setup-Priority : 7 Hold-Priority : 7
--------------------------------
FRR Information
--------------------------------
Primary LSP Info
TE Attribute Flag : 0x3 Protected Flag : 0x0
Bypass In Use : Not Exists
Bypass Tunnel Id : -
BypassTunnel : -
Bypass Lsp ID : - FrrNextHop : -
ReferAutoBypassHandle : -
FrrPrevTunnelTableIndex : - FrrNextTunnelTableIndex: -
Bypass Attribute(Not configured)
Setup Priority : - Hold Priority : -
HopLimit : - Bandwidth : -
IncludeAnyGroup : - ExcludeAnyGroup : -
IncludeAllGroup : -
Bypass Unbound Bandwidth Info(Kbit/sec)
CT0 Unbound Bandwidth : 0 CT1 Unbound Bandwidth: 0
CT2 Unbound Bandwidth : 0 CT3 Unbound Bandwidth: 0
CT4 Unbound Bandwidth : 0 CT5 Unbound Bandwidth: 0
CT6 Unbound Bandwidth : 0 CT7 Unbound Bandwidth: 0
--------------------------------
BFD Information
--------------------------------
NextSessionTunnelIndex : - PrevSessionTunnelIndex: -
NextLspId : - PrevLspId : -
<Huawei>
Hi
i checked what you have said looks like config is ok but something doesn't work
please look at the configuration attched to this thread
may be you will find what is wrong
thanks