calling-station-id of wireless controller

Hi,

The default format of the MAC address in the calling-station-id attribute of RADIUS packets from the device is xxxx-xxxx-xxxx, which means you can get the value by checking the device's MAC address.

Since the AC device supports configuring the ip address under the logical interface, you can get the device's MAC by executing the command 'display interface vlanif 1'. Kindly refer to the example below:

<Huawei>display interface vlanif 1

Vlanif1 current state : UP

Line protocol current state : DOWN

Description:

Route Port,The Maximum Transmit Unit is 1500

Internet protocol processing : disabled

IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 4c1f-cc6b-3f73

Current system time: 2021-01-22 09:35-08:00

    Input bandwidth utilization  : --

    Output bandwidth utilization : --