Bridge L3 unable to forward DHCP Informations

At the moment I have a problem with a basic configuration, that maybe does not work on the VRP system or is configured in another way compared to ExtremOS and IOS. The difficulty is as follows, when I try to configure a Bridge interface that would contain at a later point multiple interface to share the same IP address for dhcp functionality, there is no DHCP packet transmitted over the Bridge Member interface.

sysname Huawei

#

 drop illegal-mac alarm

#

 set cpu-usage threshold 80 restore 75

#

dhcp enable

#

bridge 1

 routing ip

#

ip pool pool1

 gateway-list 192.168.1.254 

 network 192.168.1.0 mask 255.255.255.0 

#

interface GigabitEthernet0/0/0

 bridge 1

 dhcp select global

#

interface Bridge-if1

 ip address 192.168.1.254 255.255.255.0 

In the example the Router is connected for simplicity to a hub, if a change the configuration, in which case I do not use a bridge interface to bind an IP to the Interface, the dhcp functions perfect and IP are leased to the Clients, if the interface gets the IP by being a member of my layer 3 bridge, there is no forwarding/or something else that prevents the clients from getting an IP.