Boot AR509GW-L-D-H

Created: Jan 9, 2017 12:10:25Latest reply: Jan 11, 2017 05:16:16 1792 2 0 0
  Rewarded Hi-coins: 0 (problem resolved)

Welcome!

I have a problem with the start of the device.

Version: AR509-V200R007C00SPCb00.ss




Hi-Boot 2015.09 (2016-09-12 - 16:33:44)

pcb_ver 0x3! board_id 0x11a!

debug_serial 0! serial_baud 9600

BDIF_GetBoardType: 0x11a OK


Initializing GPIO: OK


chipid 0x56102110!

Initializing I2C Bus: OK


Initializing TIMER: OK


Initializing PCA9555: OK


Initializing PCA9555: OK


Initializing Serial LED: OK


Initializing LED: OK


chipid 0x56102110!


boardinfo: 0x602911a0!


 LoadFailTimes: 0x2

find kernel desc at [0x1f40000]!


Boot from KERNEL2 ... commandline: ro rootfstype = squashfs mtdparts = hi_nfc: 256K (boot), 8M (boota), 8M (bootb), 10M (kernela), 10M (kernelb), 20M (rootfsa), 20M (rootfsb) , 15M (misc), 5M (dfx), - (system) console = ttyAMA0,9600 root = / dev / mtdblock6 isolcpus = 1 mem = 490M bsp_rsv_base = 0x9fe00000 OK

   Loading Kernel Image ... OK


## Transferring control to Linux (at address 81008000) ...

Starting kernel ...


[1.920000] uiParaBase df209870

[1.960000] uiParaBase 46812379

[1.990000] g_sysled_gpio 18 sysNum 18 sysled_gpio DF080000

[2.060000] sys_led_irq init ok

INIT: version 2.88 booting

Starting udev

-n Starting Bootlog daemon:

bootlogd.

Now gigahome init ......


HSAN init chip successfully ...!

hi_module_init.sh


 bootloader creation Data: Sep 13, 2016 16:43:36


Initializing I2C Bus: OK

Press Ctrl B to break auto startup ... 0

 Boot from CurrentPart = 1, CurDiskFlag: 1


Now boot from flash: /AR509-V200R007C00SPCb00.cc, please wait ...


 Get Boot ...

 Get kernel ...

 Get rootfs ...

dont support card


Save load state word ... OK!

[42.210000] watchdog watchdog0: watchdog did not stop!


5610 end

INIT: Entering runlevel: 3

-n Starting syslogd / klogd:

done

-n Stopping Bootlog daemon:

bootlogd.


********* EVM Init (Version: D20150601B02) *********

EVM Init start 3 app (s) ...... ok.

EVM Init add default link between ar and veth1 ...... Fail, ret is 0xc0000192.

EVM Appm start nc server ...... ok.

EVM Appm execute monitor (0) ...... Ok.

EVM Appm Qmp init ...... ok.

EVM Devm Qmp Init ...... Ok.

DEVM compile: Jun July 2016 20:29:13.

EVM Devm host init ...... ok.

chardev: opening backend "socket" failed


Create monitor process

BSP Monitor Root Sep December 2016 16:53:30

                                      FLASH_CreateFlashFile / mnt / misc / flashfile

EVM Sysm going to initialize ......

EVM Sysm Qmp init ...... ok.

chardev: opening backend "socket" failed

                                        fopen: No such file or directory


read /mnt/db/framemtype.bin error, FILE [/home/liujie/code/v2r7/br_V200R007C00SPC_Maintain/product/ar/app/mpu/sysadm/devdb/devdb_main.c], line [276]


devdb load db file fail

▒ 48.740000] Restarting system.


  • x
  • convention:

Featured Answers
kmyd
Created Jan 11, 2017 05:16:16 Helpful(0) Helpful(0)

This post was last edited by Done at 2018-09-29 03:39. hardware failure,Please contact local TAC.
  • x
  • convention:

All Answers
gululu
gululu Admin Created Jan 10, 2017 01:24:28 Helpful(0) Helpful(0)

@Lemon @撒么 @kmyd please help!
  • x
  • convention:

Come on!
kmyd
kmyd Created Jan 11, 2017 05:16:16 Helpful(0) Helpful(0)

This post was last edited by Done at 2018-09-29 03:39. hardware failure,Please contact local TAC.
  • x
  • convention:

Reply

Reply
You need to log in to reply to the post Login | Register

Notice Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Login and enjoy all the member benefits

Login and enjoy all the member benefits

Login