Got it

BGP Router - which choose

Created: May 6, 2019 12:43:36Latest reply: May 7, 2019 10:20:36 580 5 0 0 0
  Rewarded HiCoins: 0 (problem resolved)

We search for customer 2 x  BGP Router only for BGP.

 

Currently customer have 2 x Cisco 3825 and

- traffic goes by router is maximum 300 Mb\s

- there are 4 session BGP IPv4. Each session have full IPV4 routing table (over 700 000 prefix)

 

I check that NE20E-S2E will be meet requirements.

Could you suggest other routers ?


How impact for memory will be estabilish IPV6 session and IPv6 table BGP. ?

Featured Answers

Recommended answer

DDSN
Admin Created May 6, 2019 14:47:53

Hello!

NE20E-S has a new high-performance control board (MPUE1) and a high-performance switching engine (NSP-A/B). It supports a maximum of 25,000,000 IPv4 BGP routes and 4,000,000 IPv4 FIB entries. The NE20E-S2E has a switching capacity of 160 Gbit/s and a forwarding performance of 120 Mpps.

At the same time, you can also choose a router with a higher specification. For example, the NE20E-S4 has a switching capacity of 480 Gbit/s and a forwarding performance of 360 Mpps.
View more
  • x
  • convention:

All Answers
DDSN
DDSN Admin Created May 6, 2019 14:47:53

Hello!

NE20E-S has a new high-performance control board (MPUE1) and a high-performance switching engine (NSP-A/B). It supports a maximum of 25,000,000 IPv4 BGP routes and 4,000,000 IPv4 FIB entries. The NE20E-S2E has a switching capacity of 160 Gbit/s and a forwarding performance of 120 Mpps.

At the same time, you can also choose a router with a higher specification. For example, the NE20E-S4 has a switching capacity of 480 Gbit/s and a forwarding performance of 360 Mpps.
View more
  • x
  • convention:

@networkspec hi, are you looking for the Huawei routers to replace the Cisco router?
I advise you to consult to the pre-sale engineers. please visit https://e.huawei.com/en/get-price-info to get more detailed information about the pre-sale information.
View more
  • x
  • convention:

I check that NE20E-S2E have 4GB RAM. This is enough to 4 session BGP IPv4 with full table ?
Maybe we need choose NE20E-S2F with 8 GB RAM ?
View more
  • x
  • convention:

Posted by networkspec at 2019-05-07 06:48 I check that NE20E-S2E have 4GB RAM. This is enough to 4 session BGP IPv4 with full table ?Maybe we ...
I think it depends on your detailed network enviroment, because the more BGP route entries are, the more memory will cost. I'd suggest you to consult to the pre-sale engineers.
View more
  • x
  • convention:

Thank you for support.
View more
  • x
  • convention:

Comment

You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.