BFD one-arm echo not working on S9303

Created: Mar 31, 2016 08:27:26Latest reply: Mar 31, 2016 20:36:16 1221 1 0 0

The BFD configuration is below:

#
bfd
#
bfd 2 bind peer-ip 10.0.0.1 vpn-instance management interface Ethernet0/0/0 source-ip 10.0.0.2 one-arm-echo
discriminator local 8000
detect-multiplier 10
commit
#

I tested this setup with multiple devices on the other end (Huawei and Cisco) but the session kept flapping.

x
convention：

Helpful (0) Favorite(0) Report

Selina742 Created Mar 31, 2016 20:36:16

The root cause of this is issue configuring BFD on the management interface (Ethernet0/0/0). The management interface does not support the BFD feature.
To fix this i needed to change the interface used for BFD detection.

x
convention：

Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:

Politically sensitive content
Content concerning pornography, gambling, and drug abuse
Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy

Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."

Enterprise

Consumer

Corporate

Carriers

BFD one-arm echo not working on S9303

Third Party’s Trade Secret