Regarding the HighAvailability scenario between the SW1 & SW4 to be accomplished,
i m not able to get the downtime to less than 7ping drops;
while the down active link is retrieved back..
I am getting the drop when I reconnect back the port on vlan24 on SW4 connected to SW9.
Please find the bfd config done on SW4 & suggest for the required.
[SW4]di th
isis 1
is-level level-2
bfd all-interfaces enable
bfd all-interfaces min-tx-interval 10 min-rx-interval 10 detect-multiplier 4 network-entity 10.0101.5000.0011.00
[SW4]di bfd session all
--------------------------------------------------------------------------------
Local Remote PeerIpAddr State Type InterfaceName
--------------------------------------------------------------------------------
8228 8272 10.200.0.53 Up D_IP_IF Vlanif24
--------------------------------------------------------------------------------
Total UP/DOWN Session Number : 1/0
[SW4]di cu int vl 24
interface Vlanif24
ip address 10.200.0.54 255.255.255.252
isis enable 1
mpls
mpls ldp
Thanks
Kumar
