Hello everyone!
Today I will continue to show useful commands on the OLT with examplers. This is the fifth article about basic commands on the OLT.
26. Commands for check and display status memory for service board 0/1 and control board 0/8:
TEST(config)#display mem 0/1
{ <cr>||<K> }:
Command:
display mem 0/1
Memory occupancy: 64%
TEST(config)#display mem 0/8
{ <cr>||<K> }:
Command:
display mem 0/8
Memory occupancy: 48%
27. Command for display event history:
TEST(config)#display event history eventparameter 0/1
{ <cr>|detail<K>|eventid<K>|eventlevel<K>|eventtime<K>|eventtype<K>|list<K>||<K> }: list
{ <cr>||<K> }:
Command:
display event history eventparameter 0/1 list
------------------------------------------------------------------------
EventSN Date&Time Event Name/Para
------------------------------------------------------------------------
1569 2021-06-11 05:22+02:00 DST The GPON ONT is discovered by the
OLT. FrameID: 0, SlotID: 1,
PortID: 8, Serial Number:
XXXXX43A8DE6B9A, Password:
0x00000000000000000000, Loid: ,
Checkcode:
1445 2021-06-11 05:22+02:00 DST The auto load complete. FrameID:
0, SlotID: 1, Position: -1, Load
Type: Firmware file, Load Object:
Service board
1444 2021-06-11 05:22+02:00 DST The auto load starts. FrameID: 0,
SlotID: 1, Position: -1, Load
Type: Firmware file, Load Object:
Service board
1431 2021-06-11 05:22+02:00 DST The auto load complete. FrameID:
0, SlotID: 1, Position: -1, Load
Type: Board program, Load Object:
Service board
1427 2021-06-11 05:22+02:00 DST The auto load starts. FrameID: 0,
SlotID: 1, Position: -1, Load
Type: Board program, Load Object:
Service board
1419 2021-06-11 05:22+02:00 DST The auto load complete. FrameID:
0, SlotID: 1, Position: -1, Load
Type: Base BIOS file, Load Object:
Service board
1418 2021-06-11 05:22+02:00 DST The auto load starts. FrameID: 0,
SlotID: 1, Position: -1, Load
Type: Base BIOS file, Load Object:
Service board
1383 2021-06-11 05:22+02:00 DST The GPON ONT is discovered by the
OLT. FrameID: 0, SlotID: 1,
PortID: 11, Serial Number:
XXXXXXXX4D85AF2D, Password:
XXXXXXXX56415355434946, Loid: ,
Checkcode:
---- More ( Press 'Q' to break ) ----
28. Command for display alarm history:
TEST(config)#display alarm history alarmparameter 0/1/0 list
{ <cr>||<K> }:
Command:
display alarm history alarmparameter 0/1/0 list
------------------------------------------------------------------------
AlarmSN Date&Time Alarm Name/Para
------------------------------------------------------------------------
43708 2021-06-11 05:22+02:00 DST The dying-gasp of GPON ONTi (DGi)
is generated. FrameID: 0, SlotID:
1, PortID: 0, ONT ID: 2, Equipment
ID: 247
43666 2021-06-11 05:22+02:00 DST The dying-gasp of GPON ONTi (DGi)
recovers. FrameID: 0, SlotID: 1,
PortID: 0, ONT ID: 2, Equipment
ID: 247
43554 2021-06-11 05:22+02:00 DST The dying-gasp of GPON ONTi (DGi)
is generated. FrameID: 0, SlotID:
1, PortID: 0, ONT ID: 2, Equipment
ID: 247
43550 2021-06-11 05:22+02:00 DST The dying-gasp of GPON ONTi (DGi)
recovers. FrameID: 0, SlotID: 1,
PortID: 0, ONT ID: 2, Equipment
ID: 247
43527 2021-06-11 05:22+02:00 DST The dying-gasp of GPON ONTi (DGi)
is generated. FrameID: 0, SlotID:
1, PortID: 0, ONT ID: 2, Equipment
ID: 247
---- More ( Press 'Q' to break ) ----
With this command, we can see alarms for all ONTs on port 0/1/0.
29. Command for display all software versions of all ONTs on the port 0:
TEST(config)#display ont version 0
{ all<K>|slotid<U><0,22> }: all
{ <cr>||<K> }:
Command:
display ont version 0 all
During the course of print ,press CTRL_C to break
-----------------------------------------------------------------------------
F/S/P/ONT-ID Vendor ONT Model Software OUI
ID Version Version
-----------------------------------------------------------------------------
0/ 1/ 0/ 0 HWTC 247H V3R017C00S120 -
0/ 1/ 0/ 1 HWTC 247H V3R017C00S120 -
0/ 1/ 0/ 3 HWTC 247H V3R017C00S120 -
0/ 1/ 0/ 4 HWTC 012H V3R015C10S150 -
0/ 1/ 1/ 0 HWTC 247H V3R017C00S120 -
0/ 1/ 1/ 1 HWTC 012H V3R013C10S128 -
0/ 1/ 1/ 2 HWTC 012H V3R013C10S128 -
0/ 1/ 1/ 3 HWTC 012H V3R013C10S128 -
0/ 1/ 1/ 4 HWTC 247H V3R017C00S120 -
0/ 1/ 1/ 5 HWTC 247H V3R017C00S120 -
---- More ( Press 'Q' to break ) ----
This command can be useful when we want to change the software of ONTs.
30. Command for display the software version of ONT 0/1/1:0:
TEST(config)#display ont version 0 1
{ all<K>|portid<U><0,15> }: 1
{ all<K>|ontid<U><0,127> }: 0
{ <cr>||<K> }:
Command:
display ont version 0 1 1 0
--------------------------------------------------------------------------
F/S/P : 0/1/1
ONT-ID : 0
Vendor-ID : HWTC
ONT Version : 4B4.B
Product-ID : 4b
Equipment-ID : 247H
Main Software Version : V3R017C00S120
Standby Software Version : V3R017C00S120
OntProductDescription : EchoLife HG8247H GPON Terminal (CLASS B+/PRODUC
T ID:XXXXXXX79EGF5016496/CHIP:XXXX0020121030)
Support XML Version : 1.3.0.0
Ont MAC : -
Ont Equipment SN : -
--------------------------------------------------------------------------
This command can be useful when we want to change the software of ONT.
Thank you!
