Basic operations on OLT (4)

Hi everybody!

Today I will show you more useful basic commands on OLT with examplers.

This is the fourth and last post about basic commands on OLT.

19. Command for display current configuration:

This is a very useful command for check and display current configuration.

TEST(config)#display current-configuration

{ <cr>|include-default<K>|interface<K>|ont<K>|port<K>|section<K>|service-port<K>||<K> }:

Command:

display current-configuration

[Active: H903MPLA; Standby: H903MPLA]

[Patch Info: SPH503]

[MA5800V100R018: 8100]

[pre-config]

<pre-config>

board add 0/1 H901GPHF

board add 0/2 H901GPHF

board add 0/3 H901GPHF

board add 0/10 H902PILA

board add 0/11 H902PILA

[sysmode]

<sysmode>

switch vdsl mode to tr129

xpon mode switch-to profile-mode

sysmode end

[global-config]

<global-config>

sysname TEST

terminal user name buildrun_new_password x *j$1b$DbmbF:d~!D$|^U1(1mp+E,+vV~4I`IG&}BsKj/;NF;r"$OiJ:8W$* 7 0000:00:00:00:00:00 20xx:xx:xx:xx:xx:xx xxxx 1

first-login-info 0 self-changed-password 1 "-----"

---- More ( Press 'Q' to break ) ----

…

20. The command for display saved configuration:

This is a similar command for display like #display current-configuration. When we finished the configuration, we have to save the configuration with command #save, after that, we can see all saved configurations on OLT.

TEST(config)#display saved-configuration

{ <cr>|section<K>||<K> }:

Command:

display saved-configuration

[Saving user: NMS]

[Saving time: 0x-0x-20xx 1x:5x:0x+0x:00]

[Active: H903MPLA; Standby: H903MPLA]

[Patch Info: SPH503]

[MA5800V100R018: 8100]

[pre-config]

<pre-config>

board add 0/1 H901GPHF

board add 0/2 H901GPHF

board add 0/3 H901GPHF

board add 0/10 H902PILA

board add 0/11 H902PILA

[sysmode]

<sysmode>

switch vdsl mode to tr129

xpon mode switch-to profile-mode

sysmode end

[global-config]

<global-config>

sysname TEST

terminal user name buildrun_new_password x *j$1b$DbmbF:d~!D$|^U1(1mp+E,+vV~4I`IG&}BsKj/;NF;r"$OiJ:8W$* 7 0000:00:00:00:00:00 20xx:1x:2x:2x:0x:4x xxxx 1

---- More ( Press 'Q' to break ) ----

21. Command for display logs:

TEST(config)#display log all

{ <cr>|start-date<D><yyyy-mm-dd>||<K> }:

Command:

display log all

------------------------------------------------------------------------------

No. UserName Domain IP-Address

37772 root -- x.x.x.x

Time: 0x-0x-20xx 1x:0x:4x+0x:00

Cmd: save logfile

------------------------------------------------------------------------------

No. UserName Domain IP-Address

37771 root -- x.x.x.x

Time: 0x-0x-20xx 1x:0x:4x+0x:00

Cmd: display current-configuration

------------------------------------------------------------------------------

No. UserName Domain IP-Address

37770 root -- x.x.x.x

Time: 0x-0x-20xx 1x:0x:4x+0x:00

Cmd: display current-configuration

------------------------------------------------------------------------------

No. UserName Domain IP-Address

37769 root -- x.x.x.x

Time: 0x-0x-20xx 1x:0x:2x+0x:00

Cmd: config

22. Command for display security configuration on OLT:

With this command, we can see or check security configuration on OLT.

TEST(config)#display security config

{ <cr>||<K> }:

Command:

display security config

Anti-ipspoofing function : enable

Anti-dos function : enable

Anti-macspoofing function : enable

Anti-ipattack function : disable

Anti-icmpattack function : disable

Source-route filter function : disable

Anti-macduplicate function : enable

PPPoE overall aging time(sec) : 360

PPPoE aging period(sec) : 90

ARP detect mode : dummy

Anti-dos control-packet policy : deny

Packet unaffected by anti-ipspoofing : --

Packet unaffected by anti-ipv6spoofing : --

NS-reply function : disable

NS-reply unknown-policy : forward

ARP-reply function : disable

ARP-reply unknown-policy : forward

Anti-ipv6spoofing function : disable

IPv6 DAD proxy function : disable

IPv6 bind route and ND : disable

Packet unaffected by anti-macspoofing : IGMP

DHCP client identifier : chaddr

Packet ignored by anti-macspoofing : --

Anti-illegal-arp function : enable

Anti-illegal-nd function : enable

User delete delay(sec) : 0

Anti-macduplicate alarm function : disable

Anti-ipv6attack function : disable

Anti-icmpv6attack function : disable

Anti-ipconflict refresh function : disable

Anti-illegal-hoplimit-nd function : disable

IP option packet-policy : to-cpu

DHCP packet anti-dos control-packet period(sec) : 1

Arp-detect max-user-count function : enable

23. Commands for display CPU on control board 0/8 and servise board 0/1:

TEST(config)#display cpu 0/8

{ <cr>||<K> }:

Command:

display cpu 0/8

CPU occupancy: 3%

TEST(config)#display cpu 0/1

{ <cr>||<K> }:

Command:

display cpu 0/1

Send message for inquiring board cpu occupancy successfully, board executing...

CPU occupancy: 10%

24. Command for display monitor uplink port traffic for all ports on control board:

TEST(config)#display monitor uplink-port traffic record all

{ <cr>||<K> }:

Command:

display monitor uplink-port traffic record all

----------------------------------------------------------------------------

Port Period End Time Traffic Last Current

Direction (kbps) (kbps)

----------------------------------------------------------------------------

0/8/0 0x-0x-20xx 1x:0x:5x+0x:00 Upstream(peak) - 0