Basic onsite procedure to make visible the transmission equipment in NMS

Hello dear.
Server manages gateway NE (connected directly to the server) using TCP/IP . (using ip).
Huawei use DCC channels which exist in the frame of the signal to make server control NEs connected to the gareway ( not connected directly to the server) , these DCC channels go either in the fiber links or in the NMETH managment port (Extended ECC).
To get the NE in the NMS you need to discover the NE using one of the following:
1- if the ne is gateway (connected directly to the server) so you need the ID and IP of the NE as server use TCP/IP to manage the NE.
to creat the NE search the NE in the server to find the Ip and the ID then create the NE to manage.

2- non-gateway NE ( not connected directly to the server) you just need the ID of the new NE to create the NE .
A- if the new NE connected by fiber to other NE visible in the NMS , so you just need to find this new NE from the ECC managment page in the directly connected (by fiber ) NE EXPLORER .

B- if the new NE is not connected by fiber to other NE visible in the NMS and exist near a NE visible in the NMS , so first you should connect it through ethernet cable from NMETH to the adjacent NE NMETH port ,to find this new NE from the ECC managment page in the directly connected (by fiber ) NE EXPLORER .