Basic Commands for Configuring IS-IS

Latest reply: Dec 29, 2018 09:28:36 758 9 8 0

Huawei]isis Enter isis.
[Huawei-isis-1]network-entity 49.0001.0000.0000.0001.00 Configure an IS-IS device address.
[Huawei-isis-1]is-level level-1-2 Configure an IS-IS priority for the device.
[Huawei] interface Ethernet0/0/0 Enter the port.
[Huawei] ip address 12.1.1.1 255.255.255.252 Configure the port IP address.
[Huawei] isis enable 1 isis port enable
[Huawei] interface Ethernet0/0/1 Enter the port.
[Huawei] ip address 13.1.1.1 255.255.255.252 Configure the port IP address.
[Huawei] isis enable 1 isis port enable
[Huawei] interface LoopBack 0 Enter the loopback port.
[Huawei-LoopBack0]ip address 1.1.1.1 255.255.255.255 Configure the IP address of the loopback port.
[Huawei-LoopBack0]isis enable 1 loopback port enable
[Huawei] display isis peer Displays the IS-IS neighbor relationship established with the local end.
[Huawei] display isis lsdb Displays the IS-IS link status database.
[Huawei] display ip routing-table: Displays the routing table.

  • x
  • convention:

dagui
Created Dec 24, 2018 06:09:42 Helpful(0) Helpful(0)

Can the IS-IS protocol be specifically introduced?
  • x
  • convention:

JoneSnow
Created Dec 24, 2018 06:10:30 Helpful(0) Helpful(0)

How to plan network-entity?
  • x
  • convention:

yiyi0519
Created Dec 24, 2018 06:11:37 Helpful(0) Helpful(0)

The command is useful for the new user, but I think you can introduce the detail information for each command, such as how to design the network-entity ?
  • x
  • convention:

YOO
Created Dec 24, 2018 06:11:45 Helpful(0) Helpful(0)

Such a good solution on how to configure the IS-IS,could you please share us more information about it?
  • x
  • convention:

xiaomumu
Created Dec 24, 2018 06:18:04 Helpful(0) Helpful(0)


If I have time, I will try this command and ask you again if I don't understand it.
  • x
  • convention:

user_2915719
Created Dec 24, 2018 09:28:49 Helpful(0) Helpful(0)

If you'd explain each command and put a typical template of configuration that would be great.
  • x
  • convention:

wissal
MVE Created Dec 24, 2018 18:30:14 Helpful(0) Helpful(0)

more detail please
  • x
  • convention:

Telecommunications%20engineer%2C%20currently%20senior%20project%20manager%20at%20an%20operator%2C%20partner%20of%20Huawei%2C%20in%20the%20radio%20access%20network%20department%2C%20for%2020%20years%20I%20managed%20several%20types%20of%20projects%2C%20for%20the%20different%20nodes%20of%20the%20network.
JoneSnow
Created Dec 25, 2018 06:48:44 Helpful(0) Helpful(0)

Can these commands be combined with specific projects?
  • x
  • convention:

chouhao
Created Dec 29, 2018 09:28:36 Helpful(0) Helpful(0)

The command is useful for the new user, from this case, I learned about the Basic Commands for Configuring IS-IS. thanks for sharing, we learned a lot from this good case.wish you can share much about this product.
  • x
  • convention:

Reply

Reply
You need to log in to reply to the post Login | Register

Notice Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Login and enjoy all the member benefits

Login and enjoy all the member benefits

Login