Backup

we just can support single-point failure.  or you can choose load balance mode .

as I can configure the load balance mode ??

Hi,

You have a number of options which may suit your requirements, you have not provided enough information to be any more specific:

you have several "standby track" options including "ip route", "bfd" and "nqa". Please view the appropriate product documentation for examples of these and how to configure them.

Regards Nigel

please tell me your equipment's model.

we have lacp mode for your reference. I don't know which device mode you use.

maybe lacp your device support.

[Quidway] interface Eth-Trunk 1 

[Quidway-Eth-Trunk1] load-balance method

[Quidway-Eth-Trunk1] mode lacp-static

[Quidway-Eth-Trunk1] bpdu enable

[Quidway-Eth-Trunk1] quit

[Quidway] interface GigabitEthernet1/0/1

[Quidway-GigabitEthernet1/0/1] eth-trunk 1

hi,
thanks for your reply,
i use the router AR2220, serie AR2xxx and AR157VW

Hi guys for the backup issues i can actually suggest you with one software and that is "Ahsay software" I am basically using this software from long time and really satisfied using this software. Not only i take backup but also ia ma using it for restoring files also. For more if you want i am a leaving a link below with this comment:http://www.ahsay.com/jsp/en/home/index.jsp?pageContentKey=ahsay_products_overview