Run this command when you want to check whether the function for automatically saving configuration data is enabled, enable or disable the automatic save function, and modify the automatic save interval or time.
Run the autosave time command to set the time for automatically saving system configuration data.
Run the autosave interval command to set the interval for automatically saving system configuration data.
The frequent data save operation affects the lifespan of the system storage device. Do not set the automatic save interval to less than 1 hour. The automatic save interval of 24 hours or greater is recommended.
Example
# Display the automatic save parameters configured in the system.
<AC6605> display autosaveconfiguration
System autosave interval switch: on
Autosave interval: 120 minutes
Autosave type: configuration file
The AC cannot proactively upload configuration files to the server. You can use the NMS, such as eSight, to periodically collect device configurations.
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
Politically sensitive content
Content concerning pornography, gambling, and drug abuse
Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."