B535-232 AP isolation and limited static IP table

Hi dear,

Welcome to the Huawei Enterprise Community, since the device your having an issue belongs to the Consumer Huawei branch, I strongly recommend to visit the Huawei Consumer Support. This is becasue we don't have the permissions/privilages to obtain documentation for the B535-232 device.

Hello, friend!

B535-232 is a consumer device.

Question 1: 

You need to log in to the WebUI of the device and check whether guest Wi-Fi is enabled on the device and whether the device is connected to the guest Wi-Fi or the primary Wi-Fi SSID. Ignore the AP and switch. Connect the devices connected to the AP to the CPE, and then test whether the devices can communicate with each other.

When a guest comes to your home, you can enable the guest WLAN function. In this way, you will have two separate WLANs: host WLAN and guest WLAN. Guests can access the Internet through the dedicated WLAN, but cannot manage your router or access devices on your home network. The guest WLAN effectively ensures your network privacy and security,

You can perform the following operations:

1. Connect your mobile phone or computer to Huawei Mobile Wi-Fi.

2. Log in to the device web management page from the browser of the mobile phone or computer.

3. Touch WLAN Settings > WLAN Easy Settings > Guest WLAN, and then enable or disable Guest WLAN.

Question 2: 

Due to WebUI limitations, the static IP list of the device supports only a maximum of eight entries.

Thanks!