Got it

Automatic Synchronization Period after NTP Clock Synchronization

Created: Mar 5, 2021 07:41:39Latest reply: Mar 5, 2021 17:49:30 324 6 0 0 0
  HiCoins as reward: 0 (problem unresolved)

Hello, Community.


Thank you very much for helping me solve the problem in time.

I also want to ask you a question about NTP.

What Is the Automatic Synchronization Period of the NTP Clock After the NTP Clock Is Configured on the OLT MA5608T?


Thanks again.


Featured Answers

Recommended answer

Nino_Chou
Admin Created Mar 5, 2021 07:47:09

Hello, friend.

Nice to see you again.


  • When you run a command to configure the NTP, the first synchronization takes about 7 to 8 seconds.

  • An NTP synchronization request is sent in each round of polling at the following intervals: 64s, 128s, 512s, 1024s (2^6 to 2^10, five different periods). The system time is synchronized with the NTP time once in every 8 rounds of polling.

  • Assume that the polling period is 64s (the current polling period). The synchronization period of the NTP clock is 8.5 minutes (64s x 8).

  • Assume that the polling period is 1024s (the previous polling period). The synchronization period of the NTP clock is 17 minutes (128s x 8).


Thanks.

View more
  • x
  • convention:

All Answers
Hello, friend!
It's nice to meet you in the community.
We're working on getting the right answer for you.
View more
  • x
  • convention:

Hello, friend.

Nice to see you again.


  • When you run a command to configure the NTP, the first synchronization takes about 7 to 8 seconds.

  • An NTP synchronization request is sent in each round of polling at the following intervals: 64s, 128s, 512s, 1024s (2^6 to 2^10, five different periods). The system time is synchronized with the NTP time once in every 8 rounds of polling.

  • Assume that the polling period is 64s (the current polling period). The synchronization period of the NTP clock is 8.5 minutes (64s x 8).

  • Assume that the polling period is 1024s (the previous polling period). The synchronization period of the NTP clock is 17 minutes (128s x 8).


Thanks.

View more
  • x
  • convention:

Vlada85
Vlada85 MVE Author Created Mar 5, 2021 17:49:30

I configure NTP on my OLT. Command is: #ntp-service unicast-server x.x.x.x, where x.x.x.x is ip address of NTP server. A few seconds after that, I checked the time on OLT and everything was ok.
View more
  • x
  • convention:

Chenxintao
Chenxintao Created Mar 8, 2021 01:38:28 (0) (0)
Good!  
Vlada85
Vlada85 Reply Chenxintao  Created Mar 8, 2021 21:44:05 (0) (0)
 
Vlada85
Vlada85 Reply Vlada85  Created Mar 8, 2021 21:44:17 (0) (0)
Thank you  

Comment

You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.