AST2,Link commissioning OSN9800 M12,M05
Created: Dec 16, 2021 11:31:35Latest reply: Dec 17, 2021 01:38:49
249
4
0
0
0
HiCoins as reward：
0
(problem unresolved)
- x
- convention：
- Emotion(0)
All Answers
Posted by Kamran_ali3 at 2021-12-16 17:34 If there is laptop connected on both end NE's can i get ping results to verify whether the link is c ... Dear friend! As far as I know, the AST2 board of the OptiX OSN 9800M series does not support transparent transmission of FE Ethernet.
You can perform a ping test only after Ethernet services are configured on both sides of the site. The AST2 boards of the OptiX OSN 8800 series support the following functions:
As long as the optical path which connects between the AST2 boards is normal, you can search for the peer NE on the PC where the Web LCT is installed. This can also be used to verify whether the optical supervisory link has been established. Thanks! |
|
Comment
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
