Got it

Assistance to recover the password

Created: Sep 15, 2021 10:20:57Latest reply: Sep 16, 2021 01:38:41 316 6 0 0 0
  Rewarded HiCoins: 0 (problem resolved)

My Huawei AC6005-8 Controller's credential is not working. My local-user is test and password -test@123, you can see in the screenshot that i allowed all the terminals but i didn't get access


credential

Please help

Featured Answers

Recommended answer

chenhui
Admin Created Sep 16, 2021 01:38:41

Hello,
The service type configuration seems fine. Please check the VTY interface configuration, make sure the SSH or telnet protocol is allowed. In addition, the authentication method should be local, rather than RADIUS.
Please refer to the configuration below:
#
user-interface vty 0 4
authentication-mode aaa
protocol inbound all
#

Besides, you might need to check the policy configuration, make sure there is no policy that blocks the login behavior.
View more
  • x
  • convention:

user_4257107
user_4257107 Created Sep 17, 2021 06:14:22 (0) (0)
hi

user-interface con 0
authentication-mode aaa
user-interface vty 0
acl 2001 inbound
authentication-mode aaa
screen-length 35
protocol inbound all
---- More ---- [42D [42Duser-interface vty 1
acl 2001 inbound
authentication-mode aaa
screen-length 33
protocol inbound all
user-interface vty 2 4
acl 2001 inbound
authentication-mode aaa
protocol inbound all
user-interface vty 16 20
protocol inbound all

can you look at  
All Answers
DDSN
DDSN Admin Created Sep 15, 2021 10:21:39

Hi,
Please wait. Our engineers are looking for the answer.
View more
  • x
  • convention:

Hi @user_4257107


If you can login the switch through SSH/telnet or Console port, you can reset the password in the

CLI interface and then try again the access.


<AC6005> sys

[AC6005] aaa

[AC6005-aaa]local-user test password irreversible-cipher Huawei@123


i hope that will help.


View more
  • x
  • convention:

user_4257107
user_4257107 Created Sep 17, 2021 06:13:56 (0) (0)
thanks  
DDSN
DDSN Admin Created Sep 15, 2021 13:40:29

Hi user_4257107,
irreversible-cipher indicates that the user password is encrypted using an irreversible algorithm. So we can't find the password. You can log in to the device through the console port and reconfigure the password.
Assume that the user name is admin123 and the password is Huawei@123.
[HUAWEI] aaa
[HUAWEI-aaa] local-user admin123 password irreversible-cipher Huawei@123
I hope it helps!
View more
  • x
  • convention:

Hello,
The service type configuration seems fine. Please check the VTY interface configuration, make sure the SSH or telnet protocol is allowed. In addition, the authentication method should be local, rather than RADIUS.
Please refer to the configuration below:
#
user-interface vty 0 4
authentication-mode aaa
protocol inbound all
#

Besides, you might need to check the policy configuration, make sure there is no policy that blocks the login behavior.
View more
  • x
  • convention:

user_4257107
user_4257107 Created Sep 17, 2021 06:14:22 (0) (0)
hi

user-interface con 0
authentication-mode aaa
user-interface vty 0
acl 2001 inbound
authentication-mode aaa
screen-length 35
protocol inbound all
---- More ---- [42D [42Duser-interface vty 1
acl 2001 inbound
authentication-mode aaa
screen-length 33
protocol inbound all
user-interface vty 2 4
acl 2001 inbound
authentication-mode aaa
protocol inbound all
user-interface vty 16 20
protocol inbound all

can you look at  

Comment

You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.