Ask me! Activity

Hi @MMshaikh

The OptiX OSN 3500 intelligent optical transmission system (the OptiX OSN 3500 for short) developed by Huawei is the next-generation intelligent optical transmission equipment.

The OptiX OSN 3500 is of a "universal switch" architecture. That is, the OptiX OSN 3500 can be used in packet mode or in TDM mode. When used with the other equipment of Huawei, the OptiX OSN 3500 supports various networking applications, such as the pure packet mode application, hybrid networking application (overlay networking of the packet mode and TDM mode), and pure TDM mode application. By using a proper networking solution, the data service and conventional SDH service can be processed in the optimal manner.

Huawei OSN 3500 System Test Procedure
When talking about requirements, it is always critical, like network extension, failed board replacing, enterprise customer private line interconnection…If you buy a product and receive it after a week, but find out that the product does not work properly, that will be extremely upset and bring more troubles.

Therefore, purchasing a tested product from a qualified supplier should be the first priority issue over than price. In this document, we will show you how thunder-link.com tests SDH equipment product boards.



Test procedures of SDH equipment is all the same. So, in this article, we will use Huawei OSN 1500B to do the test.



Procedure

1. We choose Huawei OSN 1500B in our TESTbed;

2. Connect computer and the ETH port on Huawei OSN 1500B by an ETH cable;

3. Add an IP address on PC Ethernet card, 129.9.0.1;

4. Open Navigator, search the IP address of Huawei OSN 1500B, then login Navigator. Use command :ver to check the NE ID of the Huawei OSN 1500B;

For complete details, you may refer for

https://support.huawei.com/enterprise/en/transmission-network/optix-osn-3500-ii-pid-16091?category=installation-upgrade&subcategory=acceptance-test-guide