Got it

Ask me! Activity

END Latest reply: Jul 30, 2021 06:57:20 10484 906 32 0 1

Ask me here [Phase 3]


 Phase 1         Phase 2         The post containing the rules

1

1



The post is synchronized to: Community Activities

Can the MA5616 be controlled by two softswitches?
View more
  • x
  • convention:

What to Consider for When Purchasing a Video Surveillance System? @zaheernew

View more
  • x
  • convention:

How to reset root password through CLI | MA5800? @Diego.Silva
View more
  • x
  • convention:

kita
kita Created Jul 3, 2021 06:59:34 (0) (0)
Thank you @Diego.Silva  
Posted by kita at 2021-07-02 13:37 How to reset root password through CLI | MA5800? @Diego.Silva
Hello My friend!

If you have lost your OLT password, and you don't have the U2000-B server, perform 1 of the following procedures.



1- Loading an empty database can cause service interruption and loss of configuration. If the device can be connected via SNMP, it is recommended to reset the password as follows:



Set OID node hwCliUserPassword (1.3.6.1.4.1.xxx) to admin123,the value is # 0x01 0x92 0x02 0x3a 0x7b 0xbd 0x73 0x25 0x05 0x16 0xf0 0x69 0xdf 0x18 0xb5 0x00



2- If the device cannot be connected to the SNMP medium, load the empty database as follows:



Platform System start ...

Memory Data Bus Test .................pass.

Memory Address Bus Test ..............pass.

Press 'Ctrl+T' To Start Memory Complete Test

Update fpga...OK.

Copyright (c) 1998 - 2019 by Huawei Technologies Co.,Ltd.

All Rights Reserved.

The last update date of base BIOS B is : DEC 15 2019 22:00:00

===============================================================

BOARD INFORMATION :

CPU: P2010. Processor (Rev 5.01) running at 1200Mhz

1024M bytes DDR(ECC), 256M bytes flash installed on board

Baudrate of serial channel is 9600bps

===============================================================

Base BIOS version is 405

Save extended BIOS disable start flag...OK!

Last update bios succeed, synchronize data ...OK!

System Vfs init...OK

The last update date of extended BIOS is : Feb 28 2020 18:43:10

System is booting from extended BIOS...

Extended BIOS version is 405

Press <D> key to stop auto-boot

Please input password: xxx(default password )

Warning: Using the default user password is not recommended. Please change the password.

Main Menu:

==============================================

0 Boot from flash

1 Boot from serial port by Xmodem

2 Boot from ethernet port by TFTP

3 Erase extended BIOS and reboot

9 Reboot system

t Emtest

debugmode Switch debug mode

supermode Switch super mode





// The database file must be inside the .zip of the base version of the OLT software on the web page. If it is not available, it must be requested from TAC.



// Perform the following steps to load the database. After the database is loaded, the system is automatically restarted.



Submenu For TFTP

==============================================

0 Back to main menu

1 Download program & data to flash then boot

2 Only download data to flash then boot

3 Download Logical program

4 Update BOOTROM program

5 Download Voip-FPGA program

6 Download Packet file

d Download program file to ddram

12 Only download data to flash





Please enter a choice : 2

Board IP address : [9.70.14.xxx]

Board mask address : [255.xxx]

TFTP server IP : [9.85.7.xxx]

File name : [db_scu.dat] V100R018C10SPH102_DB_MPSC.DAT

You will download file 'V100R018C10SPH102_DB_MPSC.DAT' from TFTP server 9.85.7.xx,

are you sure? (y/n) [y]y

Downloading file, please wait... 188282 bytes download OK
View more
  • x
  • convention:

kita
kita Created Jul 3, 2021 06:59:09 (0) (0)
Thank you  
what benefits of access networks? @Chenxintao
View more
  • x
  • convention:

What are the types of DBA profile? @Gavin.Liu

View more
  • x
  • convention:

What's GPON network? @Sara_Obaid
View more
  • x
  • convention:

What is VLAN? @NTan33  

View more
  • x
  • convention:

What are benefit of STP? @dragos_v

View more
  • x
  • convention:

dragos_v
dragos_v Created Jul 5, 2021 07:37:06 (1) (0)
Hi @kita ! Please check them out here: https://forum.huawei.com/enterprise/en/the-spanning-tree-protocol-stp-an-introduction/thread/753419-861.  
kita
kita Reply dragos_v  Created Jul 6, 2021 07:12:45 (1) (0)
Thank you @dragos_v  
Posted by E.DR_91 at 2021-06-30 18:52 Hello @cmarban FusionCloud/ How Many Message Templates Can a User Create?
Ho, amm. Let me do a research ind I´ll give you the answear. I promise it
View more
  • x
  • convention:

Comment

You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.