Got it
Huawei Enterprise Support Community
Community Forums Routing & Switching
AR6280 QOS radius attribu...

AR6280 QOS radius attribute

Created: Mar 21, 2021 13:00:15Latest reply: Mar 25, 2021 18:31:52 640 9 0 0 0
  Rewarded HiCoins： 0 (problem resolved)
View the author 1#

Hi there... i have configured AR6280 BRAS to rate limit the PPPoE users. I need to know what are the attribute string for radius server.

Like in Cisco we used below attribute command in Radius Server,

AttributeOperatorCommand
Cisco-AVPair+=lcp:interface-config#1=service-policy output RL-16Mb


qos-profile 10M:

  car cir 1024 cbs 204800 pbs 409600 inbound

  car cir 1024 cbs 204800 pbs 409600 outbound

  statistics enable

 

[ETS-HWBRAS-aaa]dis service-scheme name HUAWEI


  service-scheme-name           : HUAWEI

  service-scheme-dns-name       : -

  service-scheme-primary-dns    : -

  service-scheme-secondary-dns  : -

  service-scheme-adminlevel     : -

  service-scheme-dhcpgroup      : -

  service-scheme-ippool         : -

  service-scheme-primary-wins   : -

  service-scheme-secondary-wins : -

  service-scheme-update-config  : -

  service-scheme-update-version : -

  service-scheme-acl-number     : -

  service-scheme-interface-flag : -

  service-scheme-qosprofile     : 10M

  service-scheme-idlecut        : -

  Tariff-level                  : -


domain huawei

  authentication-scheme auth

  accounting-scheme acc

  service-scheme HUAWEI

  radius-server ETS-BS

  statistic enable


Need assistance in this issue. TIA


Like (0) Dislike (0) Favorite(0) Share Report
Previous: HUAWEI S6330-H48X6C EVPN/MPLS
Next: Question about Huawei Optical Modules
Featured Answers

Recommended answer

(0) (0)
DDSN
Admin Created Mar 22, 2021 06:34:16

Hi hashaam，
According to the product documentation, the AR6280 does not support the application of a QoS profile to a domain. It can only be applied to an interface.
View more
  • x
  • convention：
All Answers
(0) (0)
2#
BetterMing
BetterMing Created Mar 21, 2021 13:05:37

Hello, dear.
It's nice to meet you in the community.
We're working on getting the right answer for you. Please rest assured that we'll be back with an answer shortly.
View more
  • x
  • convention：
(0) (0)
3#
DDSN
DDSN Admin Created Mar 21, 2021 13:10:59

Hi hashaam,
Do you want to know the meaning of each field in the display service-scheme command output?
If yes, you can refer to https://support.huawei.com/hedex/hdx.do?docid=EDOC1100087043&id=EN-US_CLIREF_0176366675&lang=en.
If you want to know the radius attribute, you can refer to https://support.huawei.com/hedex/hdx.do?docid=EDOC1100087043&id=EN-US_CONCEPT_0176366146&lang=en.
I hope it helps!
View more
  • x
  • convention：

hashaam
hashaam Created Mar 22, 2021 06:38:25 (0) (0)
Can you please tell me what attribute shall I used in radius. Like in Cisco-AVPair attribute, we use the command lcp:interface-config#1=service-policy output RL-16 Mb  
DDSN
DDSN Reply hashaam  Created Mar 22, 2021 08:31:13 (0) (0)
Hi hashaam,
The related attributes are not found in Huawei RADIUS attributes.  
hashaam
hashaam Reply DDSN  Created Mar 22, 2021 08:42:29 (0) (0)
It means we cannot rate limit any PPPoE client in Huawei AR6280 platform. Is that what you mean?

I just need to know what attribute shall I used to rate limit the PPPoE client through Radius.  
(0) (0)
4#
DDSN
DDSN Admin Created Mar 22, 2021 06:34:16

Hi hashaam，
According to the product documentation, the AR6280 does not support the application of a QoS profile to a domain. It can only be applied to an interface.
View more
  • x
  • convention：
(0) (0)
5#
Popeye_Wang
Popeye_Wang Admin Created Mar 23, 2021 03:29:19

Hi,

You can try to use the  HW-Qos-Data attribute to deliver the qos profile.


radius

https://support.huawei.com/hedex/hdx.do?docid=EDOC1100087043&id=EN-US_CONCEPT_0176366146&lang=en


View more
  • x
  • convention：

hashaam
hashaam Created Mar 23, 2021 07:40:01 (0) (0)
PFB result after implementing HW-Qos-Data attribute,

Mar 23 2021 10:36:24+03:00 ETS-HWBRAS %%01PPP/4/CHAPAUTHFAIL(l)[9]:On the interface Virtual-Template1:439, PPP link was closed because CHAP authentication failed.
[ETS-HWBRAS]
Mar 23 2021 10:36:24+03:00 ETS-HWBRAS %%01PPPOE/4/LINK_STATE(l)[10]:The line protocol LCP on the interface Virtual-Template1:439 has entered the DOWN state.  
(0) (0)
6#
andersoncf1
andersoncf1 MVE Author Created Mar 25, 2021 18:31:52

AR6280 QOS radius attribute-3842547-1
View more
  • x
  • convention：
Back to list

Comment

Advanced
B Color Image Link Quote Code Smilies
You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login
Huawei Website Support About Huawei Privacy User Agreement Terms of Use Cookies Cookie Settings
Huawei Enterprise Huawei Carrier Forum Training & Certification

Contact Us: e_online@huawei.com Copyright © 2022 Huawei Technologies Co., Ltd. All rights reserved.

APP

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.