Enter your choice(0-5):0
BootLoader Menu
1. Default Startup
2. Serial Menu
3. Network Menu
4. Startup Select
5. File Manager
6. Reboot
7. Password Manager
Enter your choice(1-7):1
Boot from CurrentPart=1,CurDiskFlag :0
Now boot from flash:/AR509-V200R007C02.cc, please wait...
Open /mnt/flash/AR509-V200R007C02.cc FAIL!
Boot file[/mnt/flash/AR509-V200R007C02.cc] error or not for this device!
update system file fail!
Save load state word...OK!
The RollBack Reason : 0x0
Boot Fail.....................Boot from Backup(Fail) Begin.
Boot Fail.....................Boot from Backup(Fail) End.
Boot Fail.....................Boot from another Area Begin.
Save load state word...OK!
Now boot from flash:/AR509-V200R007C02PWE.cc, please wait...
Open /mnt/flash/AR509-V200R007C02PWE.cc FAIL!
Boot file[/mnt/flash/AR509-V200R007C02PWE.cc] error or not for this device!
update system file fail!
Save load state word...OK!
Boot Fail.....................Boot from another Area(Fail) End.
Boot Fail...............................AutoSearch Begin.
!!!NOTE: Auto search packet file and startup!!!
Auto search packet file fail[ 342.660847] Restarting system.
▒
Hi-Boot 2014.11 ( 2016-03-08 - 17:20:18 )
pcb_ver 0x3!board_id 0x11a!
debug_serial 0!serial_baud 9600
BDIF_GetBoardType: 0x11a OK
Initializing GPIO:OK
Initializing I2C Bus:OK
Initializing TIMER:OK
Initializing PCA9555:OK
Initializing PCA9555:OK
Initializing Serial LED:OK
Initializing LED:OK
LoadFailTimes :0x1
Boot from KERNEL1... Loading Kernel Image ... OK
## Transferring control to Linux (at address 82008000) ...
Starting kernel ...
_ _ _ _ _ _ _ _ _ _ _ _
\ _ _ _ _ _
_
/ // \ |_/
/
/ - _ _ / / / / / /
_ _ _ _/ / / \_/ \_
__ _______\___\__________________
Loading HSAN modules
HSAN init chip successfully ...!
hi_module_init.sh
bootloader creation Data : Apr 11 2016, 11:51:25
==========================================
attribute(00)-alias(addr ) = 1430001c
attribute(01)-alias(len ) = 00000004
attribute(02)-alias(data ) = 00000000
==========================================
Press Ctrl+B to break auto startup ... 3
Enter Password:************
Default Password,Please Set New Password.
BootLoader Menu
1. Default Startup
2. Serial Menu
3. Network Menu
4. Startup Select
5. File Manager
6. Reboot
7. Password Manager
Enter your choice(1-7):5
File System
1. Flash file system
0. Return
Enter your choice(0-1):1
Flash file system MENU
1. List file in flash
2. Delete file in flash
3. Rename file in flash
4. Format Flash file system
0. Return
Enter your choice(0-4):1
please check your filesystem on the device /dev/mtdblock9!!!
Flash file system MENU
1. List file in flash
2. Delete file in flash
3. Rename file in flash
4. Format Flash file system
0. Return
.... and cycle reboot.
How can I fix it?
