AR169 DSVPN issue with Cisco

Latest reply: Jul 9, 2018 00:51:25 508 1 0 0

AR169( use ADSL to establish with Cisco  it's failuer.

Topology and Tunnel configuration likw below .


handling process
At first , check configuration on AR169 and Cisco ,both are correct .

Secondly , use command :display nhrp statistics interface tunnel0/0/0 to check AR already sent NHRP packets to Cisco .Refer below screen shot ,so AR is normal .

Finnaly , check Cisco side whether receive the packets or not . debugging like below :

Find receive request is from tunnel10253 , but on Cisco using tunnel 4 to connect with AR , then check configuration tunnel 10253 and tunnel 4 ,both are use same source , so Cisco cannot distinguish nhrp packet from which device tunnel.
root cause
On Cisco configure tunnel 10253 and tunnel 4 use same source , cause receive registration request cannot distinguish .

use GRE key to distinguish two tunnel that is use same source .

  • x
  • convention:

Created Jul 9, 2018 00:51:25 Helpful(0) Helpful(0)

AR169 DSVPN issue with Cisco-2693713-1
  • x
  • convention:


You need to log in to reply to the post Login | Register

Notice Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Login and enjoy all the member benefits

Login and enjoy all the member benefits