We have installed AR01SLV1XA (1*VDSL2) module on our AR1220 enterprise router.
We have try to configure VDSL according requirement of TelecomItalia (internet and voice service provider)
Requirements:
Retransmission (ITU-T G.998.4)
Vectoring ( ITU-T G.993.5)
SRA (ITU-T G.993.2):
USERNAME: [TheUserName]
PASSWORD: [TheUserPassword]
PROTOCOLLO: PPPoE Routed (definito come RFC 2516)
INCAPSULATION: PTM
NAT: attivo
VLAN: 835
We have set the DSL interface as PTM and PPPoE
In fact we have connection in VDSL with good performance, but assigned IP seems dynamic (change every time we active the VDSL2 module) instead of static (with original TelecomItalia modem, the IP is static).
May be PPPoE Routed (Brigded adn Routed) protocol issued or not implemented ???
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
Politically sensitive content
Content concerning pornography, gambling, and drug abuse
Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."