For this case, you may see on the link below:
Please use the command display ap-type to check on the types of AP that supported by the WLAN AC.
For this case, the AP version should be V200R005C10.
AR work as WLAN AC Version Mapping with AP.
Created: Jun 6, 2018 02:40:47Latest reply: Jun 6, 2018 07:35:49
805
1
0
0
0
If the AR150 version is V200R006C10SPC300 matched with the FIT AP5010SN version is V200R006C10SPCa00, the error will show "Version Mismatch". This is because if AR worked as AC, the version may vary. If you wish to use AR to work as a WLAN AC, you need to check on the version mapping in AR product documentation.
For this case, you may see on the link below:
Please use the command display ap-type to check on the types of AP that supported by the WLAN AC.
For this case, the AP version should be V200R005C10. This post was last edited by WheatGrass at 2018-08-16 10:05.
For this case, you may see on the link below:
Please use the command display ap-type to check on the types of AP that supported by the WLAN AC.
For this case, the AP version should be V200R005C10.
- x
- convention：
- Emotion(0)
Comment
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
