Got it

AR VRRP routing failover failed

Latest reply: Dec 20, 2018 03:24:20 2606 11 10 0 0

【Problem Description】

Have Two router (AR2220) and we have configured VRRP but in both the routers but every time both the router becomes master-master instead of master-standby.  

And the failover is also an issue…  


【Problem Analysis】

The 0/0/1 and 4/0/3 interfaces are provided by the carrier. The 0/0/2 is the LAN.
0/0/1 is the active node. The link is disconnected, and then the 4/0/3 message is sent.

In this case, the route configuration should be correct.

1


【Root Cause】  

This is due to different negotiation modes on the switch side and AR side, so it cannot ping 10.1.1.3 even if not failover the test.


【Solution Description】

After we adjust the negotiation mode on both sides then solve this issue,

interface G4/0/3

negotiation auto

 This is what I want to talk about/share with you today, thank you!

This article contains more resources

You need to log in to download or view. No account? Register

x
  • x
  • convention:

w1
Created Nov 28, 2018 09:55:00

The negotiation mode on switch side and AR side are different on interface, i think this issue should be located on the physical connection, it is not related to VRRP, just impact the VRRP state, thanks for your sharing
View more
  • x
  • convention:

yiyi0519
Created Dec 20, 2018 03:24:20

if the peer device is non-huawei, can we use the no-negotiation auto to connect it ?
View more
  • x
  • convention:

12
Back to list

Comment

You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.
Information Protection Guide
Thanks for using Huawei Enterprise Support Community! We will help you learn how we collect, use, store and share your personal information and the rights you have in accordance with Privacy Policy and User Agreement.