Symptom
After MCU startup, the ALM indicator is on.
Possible Cause
The preceding symptoms indicate that this issue may be caused by
certain faults in the board.
Troubleshooting
- Log in to the SSH window of the MCU.
By default, Login is set to admin, and Password is set to Change_Me.
- At the prompt, enter display and press Enter.
- At the prompt, enter alarm-info and
press Enter.http://localhost:7890/pages/DEE1230N/07/DEE1230N/07/resources/public_sys-resources/icon-note.gif NOTE:Run alarm-info Board slot number to query the alarms of the board in the specified slot.
- Clear the alarms according to the HUAWEI
VP9660&VP9650&VP9630 Alarm Handling.
If the fault persists, contact Huawei technical support engineers.
