When enable two traffic-policy on WAN and LAN side, it will produce alarm that is resources were overloaded, so cannot working on both side at the same time.
Dec 20 2018 14:11:59+05:30 NGN-Core-RTR %%01FIB/2/hwLCfwdResourceOverload_active(l):VS=Admin-VS-CID=0x807f0438-alarmID=0x08710000;The board forwarding engine resources were overloaded. (EntiyPhysicalindex=16908289, EntPhysicalindex=16908289, EntPhysicalName=CXP slot 2, Slot=2, Reason=134, ReasonDescription=The number of IPv4 TCAM indexes for upstream traffic exceeded the forwarding engine resource specification.)
Root Cause: Gt 1024 means the port range is 1024-65535 , it will take so many resources that the second one (acl 3102) cannot work , because the resource is not enough for 3102.
Solution: Narrow the port range or not configure the port in rules.
