Alarm information "an LSA is aged" on Firewall USG6600

Hi marina_mena,
Is the Full Name of an Alarm OSPF_1.3.6.1.2.1.14.16.2.13 ospfMaxAgeLsa?

Impact on the System

In the case of Type 1 and Type 2 LSAs, services may be affected, and thus you need to check the interface or neighbor status. In the case of Type 3, Type 5, and Type 7 LSAs, only the routes associated with lsdb-ls-id will be affected.

Possible Causes

1. The interface was Up or Down.

2. The status of the neighbor changed.

3. The routes imported by OSPF changed.

For the procedure, please refer to https://support.huawei.com/hedex/hdx.do?docid=EDOC1100122846&id=EN-US_ALARMREF_0178940495&lang=en

I hope it helps!

Hi user!

LSAs in the LSDB of the switch reached the maximum aging time. The possible cause was that the routes imported by OSPF were deleted or the OSPF interface was Down.

Impact on the System:

Possible Causes

https://support.huawei.com/enterprise/en/doc/EDOC1100038424?section=j0kw&topicName=ospf_1361211416213-ospfmaxagelsa

Thanks!