Alarm cable for the A63B cabinet
Created: Feb 13, 2022 08:26:15Latest reply: Feb 15, 2022 05:38:41
340
7
0
0
0
HiCoins as reward：
0
(problem unresolved)
- x
- convention：
- Emotion(0)
Featured Answers
Posted by dostwaxir at 2022-02-13 10:22 So which Type of connectors to use as I did not find the RJ45 IN at the cabinet. Also it mentioned o ... Dear friend! You need to remove the cover from the top of the A63B cabinet to see the wiring terminals.
Thanks! |
|
All Answers
|
Dear friend! The other end is like this.
You need to plug the four connectors into the indicator input connector on the top of the cabinet. Thanks! |
|
Posted by dostwaxir at 2022-02-13 10:22 So which Type of connectors to use as I did not find the RJ45 IN at the cabinet. Also it mentioned o ... Dear friend! You need to remove the cover from the top of the A63B cabinet to see the wiring terminals.
Thanks! |
|
Posted by dostwaxir at 2022-02-14 08:27 I did not find any place to connect the connectors. Which type of connectors to use. Do you have any ... Dear friend! You can see that the picture I sent you contains the wiring terminals and the circuit board.
From your picture, you are missing some originals. Please check your shipping list again. Or contact your device provider. Thank you！ |
|
Comment
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
