Got it
Enterprise
Community Forums Switches
Alarm about license gener...

Alarm about license generated

Created: Nov 29, 2019 13:51:38Latest reply: Nov 29, 2019 13:51:38 258 1 0 0
  Rewarded HiCoins： 0 (problem resolved)
display all floors #1

Hello forums, our customer gets the below error on S7706.

<S7706>disp alarm active

A/B/C/D/E/F/G/H/I/J

A=Sequence, B=RootKindFlag(Independent|RootCause|nonRootCause)

C=Generating time, D=Clearing time

E=ID, F=Name, G=Level, H=State

I=Description information for locating(Para info, Reason info)

J=RootCause alarm sequence(Only for nonRootCause alarm)

 1/Independent/2019-011-15 16:50:58+08:00/-/0x418c2002/hwGtlDefaultValue/Major/Start/OID 1.3.6.1.4.1.2011.5.25.142.2.1 

Current license value is default, the reason is No license available.


But the customer didn't upload any license.

 <S7706>disp al

===================================================

  ===============display license===============

===================================================

Info: No license is activated.


Can you help to confirm this?

Thanks.

  • x
  • convention：

I have this problem too (0) Favorite(0) Share Report
Previous: VLAN Basics [All About Switches 13]
Next: MAC Address Flapping Occurs Between Eth-Trunk Member Interfaces on the CE6850 Switches
Featured Answers

Recommended answer

(0) (0)
chenhui
Admin Created Nov 29, 2019 13:53:10 Helpful(0) Helpful(0)

Hi,
This alarm is to remind the customer that the current device is not loaded with a license, and there is no functional impact.
The alarm is triggered when the device is not loaded with the license. After the device restarts or the active/standby switchover occurs, the alarm is reported. The alarm is not reported when the device is running normally.

If the customer does not want this alarm generated, the command below could help to block it.
[Quidway]undo snmp-agent trap enable feature-name GTL trap-name hwGtlDefaultValue
View more
  • x
  • convention：
All Answers
chenhui
chenhui Admin Created Nov 29, 2019 13:53:10 Helpful(0) Helpful(0)

Hi,
This alarm is to remind the customer that the current device is not loaded with a license, and there is no functional impact.
The alarm is triggered when the device is not loaded with the license. After the device restarts or the active/standby switchover occurs, the alarm is reported. The alarm is not reported when the device is running normally.

If the customer does not want this alarm generated, the command below could help to block it.
[Quidway]undo snmp-agent trap enable feature-name GTL trap-name hwGtlDefaultValue
View more
  • x
  • convention：
Back to list

Comment

Advanced
B Color Image Link Quote Code Smilies
You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."

My Followers

Login and enjoy all the member benefits

Login
Huawei Website Support About Huawei Privacy User Agreement Terms of Use Cookie Settings
Huawei Enterprise Huawei Carrier Forum Training & Certification

Copyright © 2020 Huawei Technologies Co., Ltd. All rights reserved.

APP

Huawei Enterprise Support Community
Huawei Enterprise Support Community
Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.