Hello, everyone!
This post will tell you one issue for After OSN 3500 Data Is Loaded on the T2000, no SCC Is Displayed on the T2000.
Problem description:
Use the command line to deliver OSN 3500 data. After successful delivery, load data on the T2000. After loading is complete, no SCC is displayed on the T2000. When the SCC is added, a prompt that "The slot has been occupied" is displayed.
When the SCC is added, a prompt that "The slot has been occupied" is displayed.
Handling procedure:
The host version of the OSN 3500 is 5.21.12.40p01 and the T2000 version is T2000V1R8C02. Query the version match table. The suitable T2000 version with the OSN host version is T2000V2R2C02. Upgrade the T2000 to T2000V2R2C02 and then load. The problem is solved.
Root cause:
Versions mismatch.
Solution:
The host version of the OSN 3500 is 5.21.12.40p01 and the T2000 version is T2000V1R8C02. Query the version match table. The suitable T2000 version with the OSN host version is T2000V2R2C02. Upgrade the T2000 to T2000V2R2C02 and then load. The problem is solved.
That's all, I welcome everyone to leave a message and exchange in the comment area!
Thank you！
