1. Log in to eSight.
2. Add a subnet.
a) Choose Resource > Common > Add Resource > Add Subnet from the main menu.
b) Set the subnet name
c) Click OK.
3. Add the UOA
a) Choose Resource > Common > Add Resource > Add Resource from the main menu.
b) Select Intelligent Video Surveillance > VCN.
c) Set related UOA parameters.
d) Click Connectivity Test to check whether the newly-added device can connect to eSight.
e) Click OK.
The progress bar for adding the UOA and the message "Adding NEs...Please wait" are displayed.
If the NEs are added successfully, the message "Adding NEs successfully" is displayed.
If the NEs fail to be added, the message "Adding NEs failed" is displayed. Set the parameters again based on the causes in the error message that is displayed.
4. Verification
a) Choose Resource > Intelligent Video Surveillance.
b) After you click Resource Management > Monitoring Platform in the navigation tree on the left, you can find the added device in the managed object list on the right.
c) Choose Topology > Topology Management. The added subnet is displayed, as shown in 
.
d) Double-click the subnet icon. The connected VCN is displayed, as shown in 
.
e) Double-click the VCN icon. The status of each service module is displayed, as shown in Figure 4.
Figure 4: Service module status
