HIKSDK, DHSDK, or AXISSDK protocol to the VCN3000 in batches using a template file.
Step 1 Obtain the template file.
1. In the Users and Devices panel on the left of the Workspace tab page, double-click
Devices, as shown in Figure 1-1.
2. Click the Local Domain tab.
3. Select the NE for which the cameras will be added and choose Add Device > Add
Devices in Batches, as shown in Figure 1-2.
4. Click Export.
Step 2 Open the Batch Add Templates.xlsm file and enter the camera information (refer to Table 1),
as shown in Figure 1-3.
1. Select camera models in the Model column.
2. Enter the device name in the Device Name column.
3. Enter camera IP addresses in the Device IP column and NE IP addresses in the NVR
Server IP column.
4. Enter the user name and password for registering the camera.
5. Select values in the Register column based on the registration type.
Step 3 Click Export as CSV.
The DeviceImport.csv file is generated.
Step 4 Import the Template.
1. Choose Add Device > Add Devices in Batches.
2. Click Browse and select the DeviceImport.csv template to import it.
After the file is imported, the Cameras that fail to be verified:0 message, indicating
that the file is verified.
Step 5 Click Add and OK.
Cameras are added successfully.
