UBoot V200R006C10 version-315(Apr 25 2016 - 12:54:30)
Flash: 32 MB
Ethernet Mac: D4-C8-B0-00-A4-20
Ethernet Mac: D4-C8-B0-00-A4-20
Image: Current Bootup is B
Image: Current Bootup is B
Current master bootup parameter area is A
Boot Kernel A Address: 0x9ebd2000
Boot Kernel B Address: 0x9f7e0000
Press j or J to stop Bus-Test in 1 seconds: 0
Bus test starting...
PCIE bus test OK.
SPI bus test OK.
DDR bus test OK.
RGMII bus test OK.
SGMII bus test OK.
Bus test ending...
Save Bus Test Result Successful
Press f or F to stop Auto-Boot in 3 seconds: 0
Uncompressing Kernel Image ... OK
Starting kernel ...
Booting QCA955x
init_bsp_adapter ...OK.
mm_init ...OK.
sched_init ...OK.
softirq_init ...OK.
console_init ...OK.
thread_info_cache_init ...OK.
fork_init ...OK.
dbg_late_init ...OK.
imv_init_complete ...OK.
Linux version 2.6.34.15-WR4.3.0.0_standard (gcc version 4.8.1 (GCC) )
#2 PREEMPT Mon Oct 11 09:35:41 CST 2021
flash_size passed from bootloader = 32 MB
arg 1: console=ttyS0,9600
arg 2: root=/dev/mtdblock10
arg 3: rootfstype=squashfs
arg 4: init=/sbin/init
arg 5: mtdparts=ath-nor0:512k(BiosA),128k(BootupA),128k(BootupB),128k(BootEnv),1 28k(BoardData),12288k(SysImageA),3072k(configA),512k(BiosB),128k(ResultA),128k(R esultB),12288k(SysImageB),3072k(configB),256k(ArtArgs);
arg 6: mem=254M
cpu apb ddr apb cpu-720MHZ,ddr-600MHZ,ahb-200MHZ
Zone PFN ranges:
Normal 0x00000000 -> 0x0000fe00
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0x00000000 -> 0x0000fe00
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64516
Kernel command line: console=ttyS0,9600 root=/dev/mtdblock10 rootfstype=squashfs init=/sbin/init mtdparts=ath-nor0:512k(BiosA),128k(BootupA),128k(BootupB),128k( BootEnv),128k(BoardData),12288k(SysImageA),3072k(configA),512k(BiosB),128k(Resul tA),128k(ResultB),12288k(SysImageB),3072k(configB),256k(ArtArgs); mem=254M
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
FWD_MEM: aligned address 82000000
FWD_MEM: 02000000
FWD_MEM: Allocating 64MB (16384 pages) of memory at addr 82000000
the pci irq_base value: 75
the pci irq_base value: 75
plat_time_init:.............................................................done
Mount-cache hash table entries: 512
Registering WDT.............................................................done
ath_pcibios_init: bus 0
PCI init:...................................................................done
ath_pcibios_init(242): PCI 0 CMD write: 0x356
registering PCI controller with io_map_base unset
ath_pcibios_init: bus 1
***** Warning PCIe 1 H/W not found !!!
registering PCI controller with io_map_base unset
bio: create slab <bio-0> at 0
SCSI subsystem initialized
pcibios_map_irq: IRQ 75 for bus 0
ath_init_ioctl..............................................................done
init_vdso successfull
mtd: no mtd-id
ath_flash_init..............................................................done
Registering OTP.............................................................done
starting pid 54, tty '': '/etc/init.d/rcS'
kernel module inDisabling lock debugging due to kernel taint
sert
MIMC_KERNEL: Module init.
insmod: can't insert '/modules/rtl8211.ko': No such file or directory
mii_bus 0 successed to register
mii_bus 1 successed to register
Initializing arch flag Done.
/etc/rcS.d/S10startup.sh: line 86: ./usr/bin/recover_flashspace: not found
starting pid 157, tty '/dev/ttyS0': '/sbin/getty ttyS0 9600'
login[160]: root login on 'ttyS0'
BusyBox v1.30.1 (2021-10-11 01:33 CST) built-in shell (ash)
~ #
this and that give me AP in com
