The following symptoms were observed:
1. The ACT indicator on the Ethernet switching board in slot 22 was off.
2. The connection between slot 22 and slot 16 (housing a service board) was in "close" state, while the connection to a slot housing a board should indicate "open".
<CHZ_CJL_NE80E>display switch-port sfu 22
The SFU channels status :
Slot: InputChannel: Status: OutputChannel: Status:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
22 0 Open 0 Open
22 1 Close 1 Close
22 2 Close 2 Close
22 3 Open 3 Open
22 4 Open 4 Open
22 5 Close 5 Close
22 6 Close 6 Close
22 7 Open 7 Open
22 8 Close 8 Close
22 9 Close 9 Close
22 10 Open 10 Open
22 11 Open 11 Open
22 12 Close 12 Close
22 13 Close 13 Close
22 14 Close 14 Close
22 15 Close 15 Close
ACT Indicator on an NE80E Ethernet Switching Board Failed to Turn On Because of
Created: Feb 16, 2016 23:19:23Latest reply: Apr 10, 2020 17:49:47
1623
3
0
0
0
- x
- convention：
- Emotion(0)
Comment
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
