Hello, everyone!
Today, I will continue to show you useful commands for work with ONT. For every command, I will show you an example. I will use ONT HG8247H5, utp cable for connection between ONT and PC and putty for telnet or ssh.
5. Command for ONT test:
WAP>get testself
SD511X:OK!
Wlan:OK!
Lsw:OK!
Slic:OK!
Optic:OK!
PHY[1]:OK!
PHY[2]:OK!
PHY[3]:OK!
PHY[4]:OK!
PHY[5]:NoCheck!
PHY[6]:NoCheck!
ExtLsw:NoCheck!
DataCard:NoCheck!
ExtrRf:NoCheck!
DECT:NoCheck!
success!
6. Command for display main parameters of the ONT:
WAP>display optic
LinkStatus : nok
Voltage : 3269 (mV)
Bias : 1 (mA)
Temperature : 38 (C)
RxPower : -- (dBm)
TxPower : -- (dBm)
RfRxPower : -- (dBm)
RfOutputPower: -- (dBmV)
VendorName : HUAWEI
VendorSN : XXXXXA001707F
VendorRev :
VendorPN : HW-BOB-0002
DateCode : 170520
success!
7. Command for display LAN MAC address:
WAP>display lanmac
lan mac = XX:XX:57:50:B8:7D
success!
8. Command for display ONT timeout:
WAP>display timeout
timeout value = 5 min
success!
9. Command for display ONT hardware and software version:
WAP>display version
hardware version = 12E7.A
main software version = V3R018C10S115
standby software version = V3R017C10S130
uboot version = 2010.03
success!
10. Command for restore manufactory:
WAP>restore manufactory
success!
11. Commands for quit, logout and reset of the ONT:
WAP>quit
Diagnose>quit
success!
WAP>
WAP>reset
WAP>logout
12. Command for display machine item:
WAP>display machineItem
machine item = XXXXX83461HYJ5035313
success!
Thank you!
