SmartLogger 1000, 1000A, 2000 have the default IP address 192.168.0.10
In order to access SmartLogger interface you should follow the following steps:
Plug-in an Ethernet cable between SmartLogger and computer
Open Control Panel - Network and Sharing Center from the computer settings
3. Access Change adapter settings
4. Access Local Area Connection or Ethernet option (where the cable shows to be plugged)
5. Access Internet Protocol Version 4 (TCP/IPv4)
6. Change to the option "Use the following IP address" to use a static IP address. This new IP should be in the same range with the Smart Logger IP address.
E.g. If the Smart Logger has 192.168.0.10, the IP address of the computer should be 192.168.0.15 in order that the communication with the Smart Logger to be allowed.
Subnet mask: 255.255.255.0
Submit the options:
7. Open a browser and access Smart Logger IP using https:// protocol as following:
https://192.168.0.10/
8. If you receive the following information about security certificate, click on "Continue to this website (not reccommended) for Internet explorer browser:
or Chrome browser:
9. Welcome to Smart Logge interface Power System - Enspire
