This post is about the AC configuration synchronization. Please see more details below.
ENSPv510 does not support the AC configuration synchronization.
[AC1] wlan[AC1-wlan-view] master controller[AC1-master-controller] master-redundancy peer-ip ip-address 10.23.102.2 local-ip ip-address 10.23.102.1 psk H@123456[AC1-master-controller] master-redundancy track-vrrp vrid 1 interface vlanif 100[AC1-master-controller] quit[AC1-wlan-view] quit
[AC6005]wlan
[AC6005-wlan-view]master ?
^
Error: Unrecognized command found at '^' position.
[AC6005-wlan-view]master