Hello, everyone!
In this post, I would like to share with you how to adjust the fan using the command.
Metro 6100 version : metro 6100 V1R3B04B047 (5.08.03.12)
From navigator is unable to record fan information, there are no fan slot information
:cfg-get-phybd
From the document found it is sure there is FAN physical slot
Fan speed was at low mode :cfg-get-fanspeed:7 (controller slot )
Adjust fan speed mode :cfg-set-fanspeedmode:7,fantunable
Adjust fan speed from low to high by cfg-set-fanspeed :7,high
Thank you!
