Abnormal PV Curve

Confucius · Created Mar 24, 2021 08:13:09

@IRO009the easiest way to check if there is any export limit function on inverter is to turn off the load (all consumers) and to check if the inverter produce energy.

If inverter stopped, means that there is zero export limit function active and you need to turn it off via FusionSolar APP or Smartlogger (depending the inverter type).

Basically, when the production follows the slef-consumption curve means that there is a limitation active on the inverter.

BetterMing · Created Mar 24, 2021 06:59:21

Hello, dear.
I think you should check the power limit parameters. If you set the inverter to; zero power grid-connected. Then, when there is no load to consume the generated energy, the factory will limit production.

IRO009 · Created Mar 24, 2021 07:33:49

Posted by BetterMing at 2021-03-24 06:59 Hello, dear.I think you should check the power limit parameters. If you set the inverter to; zero po ...

Thank you for your answer, but where can i switch the inverter to zero power grid-connected?

Confucius · Created Mar 24, 2021 08:13:09

@IRO009the easiest way to check if there is any export limit function on inverter is to turn off the load (all consumers) and to check if the inverter produce energy.

If inverter stopped, means that there is zero export limit function active and you need to turn it off via FusionSolar APP or Smartlogger (depending the inverter type).

Basically, when the production follows the slef-consumption curve means that there is a limitation active on the inverter.

IRO009 · Created Mar 24, 2021 11:19:45

Posted by Confucius at 2021-03-24 08:13 @IRO009the easiest way to check if there is any export limit function on inverter is to turn off the ...

Thank for your answer, i will try this solution.

Abnormal PV Curve

Recommended answer

Third Party’s Trade Secret

My Followers

Enterprise

Consumer

Corporate

Carriers

Abnormal PV Curve

Recommended answer

Third Party’s Trade Secret

My Followers