What Interface Attributes Are Affected After the Interface Auto-Negotiation Mode

Latest reply: Mar 9, 2016 03:45:43 1014 1 0 0
What Interface Attributes Are Affected After the Interface Auto-Negotiation Mode Is Changed?
  • x
  • convention:

TomJ Created Mar 9, 2016 03:45:43 Helpful(0) Helpful(0)

When the auto-negotiation mode of an interface is changed from auto-negotiation to non-auto-negotiation, the default interface rate and duplex mode are restored. For example, when a GE electrical interface works in auto-negotiation mode, the rate negotiated with the remote interface is 100 Mbit/s and the duplex mode is half-duplex. After the interface is configured to work in non-auto-negotiation mode, the interface rate is restored to 1000 Mbit/s and the duplex mode is full-duplex.

NOTE:
You should change the auto-negotiation mode on both the local and remote interfaces. Otherwise, the interfaces may be Down.
  • x
  • convention:

Reply

Reply
You need to log in to reply to the post Login | Register

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!

Login and enjoy all the member benefits

Login
Fast reply Scroll to top