What Are the Common Causes that an OSPF Neighbor Cannot Enter the Full State or Generate Routes?

Created: Apr 20, 2017 08:41:50Latest reply: Apr 20, 2017 14:06:04 749 1 0 0
What Are the Common Causes that an OSPF Neighbor Cannot Enter the Full State or Generate Routes?
  • x
  • convention:

Adamcolob     Created Apr 20, 2017 14:06:04 Helpful(0) Helpful(0)

The most common causes are as follows:

The OSPF network type is non-broadcast multi-access (NBMA) but no neighbor is configured.
The hello intervals and dead intervals of the OSPF neighbors are different.
In a stub area, some routers are not configured as stub routers.
The OSPF authentication configuration is incorrect.
The OSPF router ID is the same as that of another router.
The network types of the two ends of the OSPF link are different.
The difference between the maximum transmission units (MTUs) of the two ends of the OSPF link is great.
OSPF is disabled on the network.
The area numbers are different; the network addresses of the two ends of the link are different. Check the masks of the IP addresses of both ends of the link.
The configuration of IP unnumbered is incomplete. Note that when a device is configured with IP unnumbered, the peer must also be configured with IP unnumbered.
  • x
  • convention:


You need to log in to reply to the post Login | Register

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Fast reply Scroll to top