VXLAN Calrification

Created Jun 16, 2017 21:16:04Latest reply Jun 19, 2017 07:21:05 946 1 0 0
  Rewarded E coins: 0 (problem resolved)
I've been following the VXLAN white paper for CE switches to configure an All active VXLAN gateway.  There is one bit in the example which does not make sense, as follows:

[~Spine1] interface eth-trunk 1
[*Spine1-Eth-Trunk1] service type tunnel
[*Spine1-Eth-Trunk1] quit
[*Spine1] interface 10ge 1/0/4
[*Spine1-10GE1/0/4] eth-trunk 1
[*Spine1-10GE1/0/4] quit
[*Spine1] commit

Thie white papaer says the following for this interface tunnel:

Service loopback is enabled on the Eth-Trunk to loop back service packets of the
VXLAN Layer 3 gateway


This interface is for the VXLAN gateway but it doesn't mention where this interface connects to? I'm assuming this interface connects to another spine switch?  if that's the case how will this work if the other switch is in a different data centre?


  • x
  • convention:

New_commer  Adept   Created Jun 16, 2017 21:16:05 Helpful(0) Helpful(0)

this interface need not any connection,just a interface that is not use in the switch
  • x
  • convention:

Responses

Reply
You need to log in to reply to the post Login | Register

Notice:To ensure the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but not limited to politically sensitive content, content concerning pornography, gambling, drug abuse and trafficking, content that may disclose or infringe upon others' intellectual properties, including commercial secrets, trade marks, copyrights, and patents, and personal privacy. Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see“ Privacy Policy.”
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Fast reply Scroll to top